How to fix beloader pro update problem
Please check the picture and video carefully, the beloader pro need enter the update mode (hold update button and insert PC)Generallythe beloader pro is correct, but if you install wrong driver in your pc,
the beloader pro can't be found, you must unstall beloader pro driver.
Here is video for old beloader pro (PSX5ACC)
Here is video for correct beloader pro HID
Here is video for wrong and fix beloader pro HID
After you know which version your beloader pro is,you should use correct way to update and config beloader pro.
Here is link for old beloader pro to update and config latest firmware
Here is Link for beloader pro HID to update and config latest firmware
can you make a video wall it doesn't work Diablo replied at 2023-03-25 07:06
can you make a video wall it doesn't work
you need check out if you are old or hid beloader pro
this is only for hid version Mine is new but is in USBD after i uninstall it it goes to this and still NOT FOUND. IcHOT replied at 2023-03-27 05:15
Mine is new but is in USBD after i uninstall it it goes to this and still NOT FOUND.
you need uninstall again, till it show in the human interface devices Ok i got mine to work. In Device Manager just keep uninstalling it till Beloader Pro Hid does not show up anymore. i have to do this many many many many time uninstall and installing it over and over till it doesnt show up anymore. as it doesnt show up anymore open up "HiD Manager 2.0" and it unplug and plug it in while holding the update button on the beloader. It will now show connected in the HID Manager. while in HID manager load the firmware and then click RUN. after it finish click login it will take you to the psn website and ask you to log in then once your in the redirct page copy the URL then go to Hid Manager and click on the PSN id then hit Paste. after that go to your PS5 to remote play and link then it will give you the 8digit code. put in the code then hit SAVE. now unplug from the computer and plug in the internet cable to the beloader and connect beloader to your PS5 with the left top slot same one you use to connect to PC just put that wire to the PS5. it will show in ps5 your are connected remote. Doesn’t work ! Mine comes up with this when I go to events.
What does this mean settings migrated please? I've tried uninstalling as shown several times and when i plug back in it keeps coming up in the Universal serial bus and not the HID johnmclane replied at 2023-03-29 22:08
I've tried uninstalling as shown several times and when i plug back in it keeps coming up in the Uni ...
now use the HID Manager v1.1
Pages:
[1]
2