Led Green and Blue
Hi, I updated the firmware and connected everything as described. I state that in wi-fi I work regularly. when I start the beloader, the blue LED lights up and then the green one, it tries to connect and the green LED flashes, after this it flashes green and blue and then goes off. where am i wrong? does beloader work correctly before ? or only after update firmware get problem ?and also you need reset with beloader manager if i switch it in wifi mode, then add firmware for wifi, it works fine for me. if instead I use the firmware for the lan, I set the various data from the manager and I connect. When it is inserted in the play, it flashes green for a long time and then turns green and blue and then goes out. to update the firmware from wifi to lan, I just download the one for the lan and paste it into its directory, right? or do I have to take other steps. Petih95 replied at 2022-03-18 17:10
to update the firmware from wifi to lan, I just download the one for the lan and paste it into its d ...
for lan, check here:
https://forum.beloader.com/forum.php?mod=viewthread&tid=19&extra=page%3D1
if not work, maybe not compatiable your lan usb
Pages:
[1]