Stable firmware 1220.1513
After some user testing, we suggest user update the firmware 1220.1513 。it suit for XIM APEX、Cronus Zen、Resnow S1 and others.
doesnt make a difference, everything still disconnecting after 5~ minutes is there any other firmware we can try?? jmoney replied at 2022-01-01 22:16
is there any other firmware we can try??
please email me Goodday all,
For the people that have problems with the beloader and disconnects.
I have tested the compleet weekend and had no problems at all.
What i did was the following steps.
Step 1: Disable wifi 6 in your router ( this gave problems with connections with the beloader )
Step 2: get the correct firmware. https://forum.beloader.com/forum.php?mod=viewthread&tid=3&extra=page%3D1
Step 3: plug the beloader in a usb power adapter 5v / 3a
Step 4: plug the xim in the beloader
Step 5: get a usb to 3.5 D/C kable and plug the 3.5 jack in the xim hub and the usb in the ps5
Step 6: connect the keyboard, mouse, ps5 controller to the xim hub
if all is working correct now then the ps5 controller should light purple.
the reason why you need to get extra power to the xim hub is because the ps5 controller needs more power to run stable.
with this setup i played the compleet weekend without any disconnects. Also i run the xim on 1000HZ without any problems or lagg.
hope this will help you all. all of these steps to get this one thing running? This is too much hassle........ i think a good firmware will fix this problem or a new device altogether its not that mutch work. Its more because the beloader can provide power to the xim. but then he can also power the keyboard and mouse but then he has not more enough power to power up the ps5 controller. thats why you need to get extra power to the xim hub.
This is more then normal for these kind of set ups. you also have that with combination titan2 + xim apex.
This will a good firmware not fix. you only need extra power to get stable power supply to you divices Ty dir Info but we know it but its Not working for everybody. i read on the xim forum there is a firmware that some one got the firmware ECM20220103.2103 to test from beloader.
this one makes it availible that you can use a usb hub with ethernet for stable connection. so no wifi more needed.
is it possible that we can test this firmware?
they only problem with this firmware is still the purple flashing. But the connection is rock sollid he says I can say for sure its a nice adding for a beloader,lan connection is perfect. But need to fix this purple light, same problem with polling rate. And i post video how i play on xim forum.