Naglfar Publish time 2022-07-17 21:50:24

Remote Play just for seconds - not permanent

I ordered Beloader Pro from your website, thanks for lighting-fast shipping.
First I did was checking firmware - newest. Then I installed remote play data on Be Pro using your software.
PS5 accepted as a remote play connection.
But when plugging in PS5 + LAN, Beloader Pro does establish a very brief remote play connection (according to PS5 message), green light keeps blinking, then remote play connection is terminated (according to PS5 message) an Beloader Pro turns white, then off.

I repeated installation, changed power source, restarted the AP PS5 and Beloader is added (in same room, same network)

What´s the solution?

(Had your Beloader v1, installation routine is known)

fefi777 Publish time 2022-07-18 11:05:50

Hello, if you disconnect within a very short time after connecting, it is generally to grab control with your dual sense. You can turn off your ps5 first, and then press the power button to turn it on. At this time, don't touch your dual sense, let it remain closed, and then connect your beloader Pro to see if it will remain connected. If so, it is your dual sense and your beloader Pro that are grabbing control of your PSN account

Naglfar Publish time 2022-07-18 17:59:34

You made my day ! Thanks alot, problem solved. Beloader standard didnt show this behaviour, but now all works just fine.

fefi777 Publish time 2022-07-19 10:23:26

Naglfar replied at 2022-07-18 17:59
You made my day ! Thanks alot, problem solved. Beloader standard didnt show this behaviour, but now...

In fact, this is the principle of Sony game console. Control is bundled with psnid:)
Pages: [1]
View full version: Remote Play just for seconds - not permanent