I found out what could be the issue of mouse ghost movements
I think the issue is that after the PS5 software update the issue is the power supply for the PS5 dual sense while it’s connected to the Xim apex. It seems that the previous method with the USB lan adapter linked to the 5V 2A power adaptor doesn’t work well anymore, I think that the USB dual sense connection need more energy the ps5 front usb port is 5v3aso you can plug beloader into it I try play on ds5 and ds4 and have stil then same problem mouse sometimes swiming , drifting on game Even with the Beloader plugged into the front USB port the issue is still here Guy, thy to set the xim to 125hz and sync off. It dosnt eliminate the issue to 100% but it is mutch better. So guys, for the best connection results you need a external Power supply for the XIM USB Hub and a Power supply for the beloader. The best way is to usw the DS4 for lass input lag. Xim config still 125 hz and sync off. beloadermanager replied at 2022-09-30 01:50
the ps5 front usb port is 5v3a
so you can plug beloader into it
Even if the output port can provide sufficient current, it doesn't necessarily allow high current to flow to a daisy-chained Beloader, USB HUB network adapter, or USB cable that is not supported by the USB standard.
It was obvious that there was a power problem, so I connected the USB HUB network adapter and converter to a different power source than the Beloader as of firmware LAN 20220223.1815.
In the past, when the current needed was measured by a tester, the value was about this.
Beloader:0.5A
USB HUB network adaptor:0.5A
converter:1A
DualSense:0.5A
Plus keyboard, mice, and controllers...
Pages:
[1]