Another Question about BS U5

battlelog123

Can we just use the U5, with no m/k? I just want to use my T2 with my ps5 ds controller to play cod or bf, using some scripts???

In your instruction video, you just show hooking it up those device with m/k, I dont want to use m/k, just controller, is this possiable?

If so, how to I accomplish setting this up?

Thank you.

besaviormanager

If your converter support, then it is ok
just not insert M/K into your T2,  but insert a PS4 /X1/XSX joypad into T2

battlelog123

besaviormanager replied at 2023-11-25 15:05
If your converter support, then it is ok
just not insert M/K into your T2,  but insert a PS4 /X1/XSX ...

So we can not use a ps5 controller on the T2, even if the T2 is connected to the BL U5???

How would I connect all this to test this out?

Thanks in advance?

battlelog123

Ok so I figured it out.
1. If you have the new PS5 slim, you can use a usb-c to usb-a adapter.

2. you will set up the U5 as follows. USB-C adapter to ps5 slim, U5 connected to to USB-C adapter.

3. Once the U5 is connected to the PS5 slim, connect the usb-c power cord to the U5, connect a PS5 DS controller to the side of the U5, as the set up videos that Beloader has shown on Youtube.

4. Connect the T2 to U5, On the T2 connect another PS5 DS controller, or what ever controller is supported by the U5.

5. On the T2 software controller protcol, set it to PS5, or what ever controller you use, ps4, xbox 360, etc,etc.