|
|
Edited by Megatf at 2024-05-29 16:21
This test was on the ORIGINAL Firmware - LatencyTest_P5MATE_XIM.docx
This test was on the NEWEST Firmware - LatencyTest_P5MATE_XIM_NEWEST_FIRMWARE.docx
The original max polling rate of the P5Mate was 250Hz on launch, not 1000Hz as shown in this latency test using HIDUSBF, USBPcap, and Wireshark
The latest FW update has a max polling rate of 500hz.
This is better, but still shy of the 1000Hz promised.
I share this information to the Beloader team in hopes you will improve the FW to accurately report at 1000Hz polling rate and will continue to conduct these tests.
Also, please enable the Rumble features of the P5Mate. I am a Xim Matrix Alpha tester and they are currently implementing Rumble Weapon detection, this feature cannot be utilized because Rumble is disabled on P5Mate.
Thank you
|
|
Post time 2024-05-29 16:19:20
