Led Green and Blue

Petih95

Hi, I updated the firmware and connected everything as described. I state that in wi-fi I work regularly. when I start the beloader, the blue LED lights up and then the green one, it tries to connect and the green LED flashes, after this it flashes green and blue and then goes off. where am i wrong?

beloadermanager

does beloader work correctly before ? or only after update firmware get problem ?
and also you need reset with beloader manager

Petih95

if i switch it in wifi mode, then add firmware for wifi, it works fine for me. if instead I use the firmware for the lan, I set the various data from the manager and I connect. When it is inserted in the play, it flashes green for a long time and then turns green and blue and then goes out.

Petih95

to update the firmware from wifi to lan, I just download the one for the lan and paste it into its directory, right? or do I have to take other steps.

beloadermanager

Petih95 replied at 2022-03-18 17:10
to update the firmware from wifi to lan, I just download the one for the lan and paste it into its d ...

for lan, check here:
https://forum.beloader.com/forum ... &extra=page%3D1

if not work, maybe not compatiable your lan usb