Xim4 + Beloader LAN = purple flashing?

musztarda

Hi I find some solutions for xim4 and ps5 games with my xim4 I try today different way it is the same configuration like on pictures and video on my previous post but now with BELOADER front USB - then CRONUS ZEN - then XIM4 - DS4 - M&K it was stil not working M&K not responding but today I connected dual snes on the back usb( and still have ds4 on xim4)and is working perfect. Before I play only Battlefield 2042 ps4 version on my PS5 with xim4 + cronus zen but I have every few minutes disconnections so was needed unplug xim4 and plug again.  Today I play 2h Battlefield 2042 with no problems I have xim4 best mouse translation setup by xim apk and cronus zen scripts . DUAL SNES on the back usb help but xim4 still not working self without cronus zen I trying more tomorrow with usb powered hub.  P.S. so if you have any disconect problems try ad extra dualsense on the back usb I start console then use other hardware

maraspolska

my xim 4 (ds4controler) works with beloader without disconnecting only lan.
-for Xim4 I use Firmware [20211020]
-for BELOADER I use Firmware [20220103.2103]
-I am using Cheap KY-688 usb hub with built-in Realtek RTL8153 USB 3.0 Gigabit Ethernet Adapter chipset.
- 5v3a power supply for beloader
-I recommend setting the beloader in wifi mode first so that it connects to the console. (WE HAVE SURE THAT EVERYTHING IS SET UP WELL) then upload the lan firmware [20220103.2103]
-we connect the devices in the next order ...
a) connect to usb hub ethernet cable.
b) connect xim4 with connected mouse and keyboard to usb hub
c) hub usb connect to beloader
d) beloader for power supply
e) press the button on BELOADER the diode should blink blue which after a few seconds will change into a solid green color

antonis_lambrou

maraspolska replied at 2022-01-18 02:11
my xim 4 (ds4controler) works with beloader without disconnecting only lan.
-for Xim4 I use Firmware ...

so if you do not use a hub this doesnt work?

David

Hi,

I have now the XIM4 module from my friend and I made yesterday a test.
With beloader v2 and WI-FI firmware (1513) I can play with it. But after a time the xim4 module hangs up and the lights are constantly white. But there is no purple flashing light when I use the mouse.

With beloader v2 and LAN firmware I can also play, but the lights of xim4 is flashing constantly purple. Someone wrote that this comes from the usb3.0 hub. But I don't think so.
I will make today a test with the WI-FI firmware AND the usb hub together.

For me it seems the LAN firmware has someware an error. Could it be?
And yes, I know that beloader doesn't support the xim4 module officially. But it would we very nice if it will do.

Maybe someone here can use the LAN firmware and an usb hub without flashing purple lights. If yes, what usb hub do you use?

Thanks for your help.

Best regards

David

I tried now the beloader (Wi-Fi firmware) -> usb hub ->

David

I tried now the beloader (Wi-Fi firmware) -> usb hub -> xim4 and there is no purple flashing light. So, maybe the lan firmware can get a double check?