L2 not working

Boloballs

Hello

I just mounted the dpm 020 kit, everything works except the L2 button.

An idea of the problem

Thanks

beloadermanager

you get is besavior controller or diy kit ?
generally, if you use verify function after install kit, it will check out if any problem there

Boloballs

Hello, the first test told me that L2 was in default.

Thinking that I had made a mistake in the assembly I installed the kit another controller, but after the test was R1 which was in default...

I think the R1 L2 tablecloth had a problem...

beloadermanager

Boloballs replied at 2023-01-28 22:27
Hello, the first test told me that L2 was in default.

Thinking that I had made a mistake in the ass ...

generally, it is modify problem
you can order the besavior controller which we modified well in factory

so you get is 100% working well

Boloballs

The assembly was very, very easy for me... I'm thinking of a hardware failure

beloadermanager

Boloballs replied at 2023-01-29 00:53
The assembly was very, very easy for me... I'm thinking of a hardware failure

you can check if that solder wire has problem, the wire soder to L2 you mention