Firmware for Lan connection release

wCbrill

svenbeuken replied at 2022-02-28 07:14
heb je discord of mag ik je psn?

Sven waarvoor heb je die nodig?

slexyy

Hey.. i have a problem... how i can install the Firmware Update for lan on my Be Loader? I Want to play with it but im Stuck? Please help me

wCbrill

slexyy replied at 2022-03-02 04:53
Hey.. i have a problem... how i can install the Firmware Update for lan on my Be Loader? I Want to p ...

what is your problem with the lan firmware?

if you want to instal the lan firmware you need to hold down the buttom on the beloader. while doing that you need to enter it in your computer. then you get the file on the beloader where you see update file. replace that file with the lan firmware and you are dont updating the beloader.

svenbeuken

wCbrill replied at 2022-02-28 21:40
Sven waarvoor heb je die nodig?

dan kan ik je makkelijker berichten sturen of vragen stellen heb wat probleempjes met de LAN aan sluiting

wCbrill

svenbeuken replied at 2022-03-03 06:03
dan kan ik je makkelijker berichten sturen of vragen stellen heb wat probleempjes met de LAN aan s ...

heb je een persoonlijk bericht gedaan op de forum

morcillo

es el mismo metodo para crozus zen por lan

Carphunter

hallo ich habe mir den beloader geholt bekomme ihn aber leider nicht verbunden
kann mir da wer weiterhelfen Danke LG

TwinDomo

I can confirm the lan firmware and usb network adapter works. I haven't had a single disconnect after playing several hours.
I'm using mouse with 500Hz and xim apex on 500Hz with ps4 DS4 v2. Keyboard and mouse are separately powered, I'm using couchmaster cycon 2 product =)
My setup is PS5 > usb type C to usb type A cable > Beloader > Usb Lan Adapter > Xim Apex > couchmaster cycon 2 (mouse g502, keyboard g13,  DS4 V2) {cycon 2 has it's own powered usb hub}

This is the network adapter I'm using with chip RTL-8153: USB to Ethernet Adapter, uni 3... https://www.amazon.com/dp/B0871ZHCKK?ref=ppx_pop_mob_ap_share

morri

Jesús respondió el 2022-01-11 03:49
Haré una nueva publicación sobre algunos concentradores LAN

good to connect by lam I just have to change the bim file for the wifi bim file?, thanks

RipXimOnPS5

Hello,

I Need help I try the Lan way and I made it like in the Forum.

I have this hub https://www.amazon.de/dp/B09BVG5 ... ding=UTF8&psc=1
I have 2 Lan Cabel but the Beloder just flash blue what is the Problem?