Stick potentiometers based on hall sensors compatibility

Do.it

If you install a DIY Bisevior set on a gamepad with K-silver or Ginfull magnetic sticks, the L2 R2 trigger stops working. The paddles can't see when they are pressed. Is this planned to be fixed in future firmware? And when will they appear at all? It's already been a year since the last firmware release date, you wrote that the team is now busy with a new device and now P5MATE is out, and there is silence in the chat. The ability to create custom bindings has not been made.

Uzik1985

Same here. Just instaled besavior kit on my bdm 030 with ginfull hall effect sticks, and L2 and R2 act as being pressed. Is this problem with hall sensors or something with ribon cable maybe? Other buttons working ok.

Do.it

Uzik1985 replied at 2024-09-06 18:43
Same here. Just instaled besavior kit on my bdm 030 with ginfull hall effect sticks, and L2 and R2 a ...

No it’s because of Hall effect stick. In order to calibrate the trigger you need to do a self-test, but it doesn't come with magnetic sticks. In order to work more or less normally you need to first make a self-check on analogue sticks, and then put magnetic ones. But still writing in the "learning" menu will work crookedly. Sticks will repeat movements on the wrong trajectory, and pressing R3 will not be read at all. Although in mapping and other menus R3 will be assigned perfectly.

It might work if you calibrate the paddles on another gamepad of similar revision. But I haven't tried it personally, just an idea.