New Beloader not working

MattH · Post time 2022-05-11 21:31:03

Just received my Beloader from Amazon.

I updated the firmware first (Beloader Update 20211220.1513).

I ran through setup with no issues, setting my PSN ID and WiFi. My PS5 is connected via LAN. I have a very good router (ASUS RT-AX86U).

The Beloader boots up, flashes blue, then flashes green, then solid green, and I get a message on the PS5 that I have connected Remotely.

BUT, nothing works. I only have a PS4 controller plugged into the Beloader (so no big power drain) and the PS5 just isn't receiving the input.

Help!

preston47s · Post time 2022-05-12 01:16:40

Edited by preston47s at 2022-05-12 01:18

You need to make sure your Ps4 controller is v2 or else Beloader won't work.
The quickest way to find out if you have a v1 or v2 Ps4 controller is to check the Model# in the back of the controller. The "CUH-ZCT1" series is v1 while the "CUH-ZCT2" series is v2.

MattH · Post time 2022-05-12 01:21:00

Thanks yes my controller is V2. However I have had it working, although it took a long time and lots of messing about with it. But it worked for a little while, and then it stopped again and logged me out of Remote Play during a game. Why would this happen!?

preston47s · Post time 2022-05-12 02:52:18

Edited by preston47s at 2022-05-12 02:55

You dont have the latest wifi firmware, download the new firmware https://forum.beloader.com/forum.php?mod=viewthread&tid=100

		Remember me	Forgot password?
Password			Register