Problem with P5Mate (Issues with Connecting P5Mate, Titan2, and PS4 Controller)

soull

Dear Beloader Team,

I'm trying to connect my PS4 controller to the Titan2 via the P5Mate, and then to the PlayStation 5.
The issue is as follows: the Titan2 detects that something is being connected, but it starts blinking and the connection drops as soon as I plug in the PS4 controller.
The Titan2 keeps attempting to reconnect to the P5Mate without success.

Is there a patch or update available that would resolve this issue, allowing the connection to be established?
I would prefer to remove the Zen from my setup and play directly, without using Remote Play.

I'd appreciate any solutions you might have and would be grateful if you could send me an email with further information.

Kind regards,
Gamefreak

apexzentester12

I use the Titan 2 with no issue. You should have the PS4 controller plugged into the Titan 2 veggie you boot up your console

soull

Unfortunately, I have already tried this. I still have the problem.

besaviormanager

soull replied at 2024-12-03 12:49
Unfortunately, I have already tried this. I still have the problem.

maybe tt2 need set into ps4 mode ?

soull

I have already set this up, as you can see in my image. Could you test it?

besaviormanager

soull replied at 2024-12-05 10:35
I have already set this up, as you can see in my image. Could you test it?

we not have tt2 here, but some tt2 user test and work before

soull

This is bad for P5Mate no solution

antithesis

Titan Two works with P5Mate. I use a Titan Two with XIM MATRIX into P5Mate to PS5. I've tried DualSense, DualShock 4, DualShock 3, Xbox One, Series X/S and Switch Pro controllers on T2 and they all work on PS5 via P5Mate.

Check your Input and Output Protocols on T2. Set both to PlayStation 4.

To the Beloader team - I'm antithesis on the XIM and ConsoleTuner forums. I can also confirm Titan One works with these same controllers and settings.

I can test CronusMAX to confirm compatibility. A DualSense controller likely won't work on CM because it lacks support for the PS5 controller whereas Titan One and Two both have DualSense support. A DualShock 4 controller with CM set to PlayStation 4 will very likely work.