Remedy after applying calibration GUI

miki

I am using Besavior. After checking that the self-check was normal before making the adjustments, and adjusting it with the calibration GUI, the self-check stopped responding to R2 and I was unable to proceed. After that, L2 and R2 stopped responding. I wish I hadn't done this. Is there a solution?

Do.it

Most likely, you have Hall sensor sticks installed. After calibrating the sticks, you need to do a self-check to calibrate Besavior, but it does not work with magnetic sticks. Therefore, there is no solution other than installing standard sticks. If you have already calibrated this gamepad with standard sticks, then everything will work anyway except for the correct control of the sticks through the petals. That is, with magnetic sticks, the petals will not work correctly for connecting third-party devices and recording stick movements. If you haven't calibrated the sticks on this gamepad yet, you'll first have to reinstall the standard ones sticks.
If you did not install magnetic sticks, but simply calibrated the original ones, then these things are not related to each other. Calibration does not affect the testing of the triggers.