Stable firmware 1220.1513

beloader

Hello, I have a loader error code, everything flashes green at first, but then green and red, why is that?

Everything was fine before, but I did the lan update and then back to the new wifi update....maybe you can upload the very first update, I think it's the update

David

beloader replied at 2022-02-13 22:22
Hello, I have a loader error code, everything flashes green at first, but then green and red, why is ...

I had the same problem today. Try to connect a new device with the ps5 so that you get a new 8 digits code from the ps5.

ediand12

how do you get audio to work with headset

Bunkerphill

wCbrill replied at 2022-01-04 17:42
Goodday all,

For the people that have problems with the beloader and disconnects.

Hi wCbrill, thanks a lot for your description!

May I ask a question: How are the beloader and the xim connected to the PS5, when they're both plugged in a usb power adapter 5v/3a according to step 3 and 4?

In Step 5: After plugging the usb to 3,5 D/C kable into the xim hub, you have two usb left. One of the usb to 3,5 D/C kable and the second the usb of the xim hub itself. Which one do you plug in the ps5, both and without xim and beloader, cause those are plugged in the usb power adapter?

I understood you steps like this:

Step 1: Disable wifi 6 in your router ( this gave problems with connections with the beloader )
Step 2: get the correct firmware. https://forum.beloader.com/forum ... &extra=page%3D1
Step 3: plug the beloader in at the back of ps5
Step 4: plug the xim in the beloader
Step 5: plug the usb of the xim hub in the xim
Step 6: get a usb to 3.5 D/C kable and plug the 3.5 jack in the xim hub and the usb in a usb power adapter 5v / 3a
Step 7: connect the keyboard, mouse and ps5 controller to the xim hub

with this configuration it's working and the ps5 controller lights purple, but after about 30 min it is disconnecting and I think I misunderstood something.

Thanks a lot for help Phill

FERN69Q

Bunkerphill replied at 2022-04-01 22:56
Hi wCbrill, thanks a lot for your description!

May I ask a question: How are the beloader and the ...

Should go like this

Shqiptar-46

wCbrill replied at 2022-01-04 17:42
Goodday all,

For the people that have problems with the beloader and disconnects.

Worked perfectly fine for me my man thank u !