Self-Checking function video

beloadermanager

If user get any problem for besavior controller, you need check if has installation problem.
Here is the video link :   https://www.youtube.com/watch?v=XP5two6ydvs

If Self-Checking successfully, it means installation is well
If Self-Checking is fail, it means installation has problem, user need recheck installation.

matrix

ho fatto tutto perfettamente ma non riesco a farlo funzionare con xim apexho fatto  i'ultimo aggiornamento

Musa06

I'm having issues getting my ReaSnow S1 to work when connected to my Besavior controller. The two accessories do not seem compatible as the ReaSnow S1 does not recognize or function properly with the Besavior. Please advise if there is any way to resolve this incompatibility issue between the ReaSnow S1 and Besavior controller.

Do.it

I would like to point out that the self-check not only checks if the kit is installed correctly, but also calibrates the board based on gamepad readings. So it is important to do it after installation or reflashing even if you are sure that you have installed everything correctly.